INF-38
7-2-3. Write data of XP EEPROM
NOTE: Please execute the writing data of XP EEPROM to both system NTSC and PAL when you write the
data of AG-HMC151E. The SYSTEM FREQ can be selected by setting menu (SYSTEM FREQ / OTHER
FUNCTION / Setting menu).
1. This camera recorder is set to COM mode.
2. Start up the PC EVR software.
3. Select the model in “Select Model” box and click “Start(S
)” button on Start Communication screen.
4. Clicking “N
ext” button, main screen is displayed.
5. Select “Write ARM all data to EEPROM (W
)” in “File(F)” menu, Select file screen is displayed..
6. Select the file to be written on Select file screen and clicking “Open” button, reading starts. While writing data,
progress bar is displayed. When “OK(O
)” button is displayed, data writing is complete.
To Next Page
Loading...
