Panasonic AG-HMC150P - Power sources; Battery and AC Adapter Usage

20
Power sources
Using the battery
Installation
Insert the battery until it clicks into place.
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.
2
Remove the battery while pressing the
battery release button.
Support the battery with your hand to ensure
that it will not fall.
Mode lamp
Battery release button

Using the AC adapter
Installation
1
Connect the DC cord to the AC adapter.
2
Plug the AC power supply cord into the
power outlet.
3
Insert the DC cords battery connector until
it clicks into place.
DC cords battery
connector
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.
2
Remove the DC cords battery connector
while pressing the battery release button.
3
Disconnect the AC power supply cord from
the power outlet.
Battery cannot be recharged when the DC
cord is connected to the AC adapter.


CAUTION:
This apparatus can be operated at a
voltage in the range of 110  240 V AC.
Voltages other than 120 V are not intended
for U.S.A. and Canada.

USO RESTRITO