62
Adding shot marks to clips
Adding shot marks (
M
) will make it easier to find
the clips you are looking for.
1
Tilt the Operation lever in the
directions to move the yellow frame to the
clip for which a shot mark is to be added.
2
Press the USER button to which the shot
mark function has been allocated. (Page 88)
To release a shot mark, repeat the above steps.
It is not possible to add shot marks to clips
recorded using a consumer camcorder model.
•
Thumbnail screen (continued)
Direct shooting functions
If you press the START/STOP button in PB mode,
the CAM mode will be automatically activated, and
shooting will start.
To Next Page
Loading...
