Panasonic AG-HMC150P - Setting the Display Items

81
Setting the DISPLAY items
Display the following items on the viewfinder and LCD monitor by pressing the DISP/MODE CHK
button or by configuring OTHER DISPLAY of the DISPLAY SETUP screen of the setup menus. (Page 94)
Displays
MODE CHK
(Hold down DISP/
MODE CHK button)
DISPLAY
OTHER DISPLAY settings
ALL PARTIAL OFF
1 Time code display

2 Media information display

3 Media capacity display

4 AUTO/MANUAL switch operation
display
x
5 Digital zoom ratio display
x
6 Recording format display
xx
7 Information display  
8 EXPANDED display  
9 Microphone level automatic control
display
xx
11 Timestamp display
4

12 Date and time display
4

13 Frame rate display
1
xx
14 Shutter speed display
x
15 Audio level meter display

16 Auto iris control display
x
17 Iris display
x
18 Zoom position display

19 Focus control information display

21 ND filter display
xx
22 Gain display
2
x
23 AWB information display
3
x
24 Marker display  
25 Optical Image Stabilizer display
x
26 Scene filename display
xx
27 Remaining battery capacity display

29 Standby mode display  
31 Monitor audio level display  
: Displayed
x: Not displayed
: Displayed depending on other settings
The item in
in the MODE CHECK space appears when you press and hold the DISP/MODE CHK
button.
The item in
in the DISPLAY space disappears when you press the DISP/MODE CHK button.
1
Not displayed when frame rate is set to 60i.
2
0 dB is not displayed.
3
Only preset 3.2K and 5.6K are displayed.
4
If the timestamp display and the date and time display are both displayed simultaneously, they will not
disappear even if the DISP/MODE CHK button is pressed.
USO RESTRITO