55
Shooting
Initializing scene files
You can return current setting values to their
factory default settings.
1
Set the POWER switch to ON. (Page 26)
The CAMERA lamp lights red.
2
Press the MENU button.
3
Touch SCENE1 or SCENE2 for FILE SELECT
in the setting menu SCENE FILE screen.
4
Touch INIT for LOAD/SAVE/INIT in the
setting menu SCENE FILE screen.
5
Touch YES when the confirmation message
appears.
The scene file selected in the FILE SELECT
item will be initialized.
“SCENE 1 (or SCENE2) LOADED TURN
POWER OFF” appears on the screen. The
default settings will be applied when you
restart the camera.
•
•
•
To Next Page
Loading...
