Up to 10 Split-Screen, MultiViewer Display
The built-in MultiViewer Display function can simultaneously
display various images, including program (PGM), preview (PVW)
and input signals, on a single monitor. The screen may be split
into 4, 5a/5b, 6a/6b, 9 and 10a/10b sections.
On-Screen Display (OSD)
The OSD increases operating ease by outputting setting menus to
a monitor screen. (SDI OUT 2 or DVI OUT only)
Audio Level Meter
This function displays the level of the embedded audio signals
(group 1/1ch, 2ch) superimposed on the SDI input signal.
Linking with a Remote Camera Controller
By linking the AW-HS50 to the optional AW-RP50 Remote
Camera Controller with an IP connection* over a network, a
number of remote operations become possible, such as operating
the optional AW-HE50S or AW-HE120 HD Integrated Camera.
The AW-HS50 and AW-RP50 have a unified design and half-rack
size, so they can be mounted side by side in a single rack.
AW-RP50 and AW-HS50 Linking Functions
• The setting data (iris, gain, etc.) for the AW-HE50S or
AW-HE120
HD Integrated Camera can be displayed on a split screen using
the switcher's Aux output or MultiViewer output.
• The switcher's On-Air tally data can be sent to the Camera
Controller.
• The switcher's bus footage (Aux, PVW, P-in-P, Key-F) can be
selected at the Camera Controller. Switching of the bus footage
can also be linked to the camera selection.
• The switcher's MultiViewer Display can also be changed at the
Camera Controller to a full-screen display of the camera image
(Aux bus only). This supports the camera's Focus Assist function.
• The Pan/Tilt lever and Zoom button on the Camera Controller
can be used to change switcher parameters.
* Only one AW-RP50 can be connected to the switcher via an IP connection. And connection
is not possible with a public network.
To Next Page
Loading...
