To Next PageTo Next Page
Need help?Do you have a question about the Panasonic AG-HPX370 and is the answer not in the manual?
General| Effective Pixels | 2.2 Megapixels |
|---|---|
| Recording Media | P2 Card |
| Audio Recording | 48kHz/16-bit, 4 channels |
| Audio Inputs | 2 x XLR |
| Camera Type | Shoulder Mount |
| Sensor Type | 3MOS |
| Sensor Size | 1/3 inch |
| Recording Format | DVCPRO HD, DVCPRO50, DVCPRO, DV |
| Video Resolution | 1920 x 1080 |
| Lens | Interchangeable |
| Focus | Manual, Auto |
| Gain | -3dB to +18dB |
| Video Signal | HD/SD |
| Viewfinder | Color LCD |
| Input/Output | HDMI, SDI, Component, Composite, USB |
| Battery | Lithium-ion |
| Power Supply | DC 12V |
Provides essential safety guidelines for operating the camera, covering electrical shock, fire hazards, and environmental considerations.
Describes the key hardware features of the camera, including sensor, digital circuit, and gamma curves.
Details the camera's interfaces, P2 card capabilities, and immediate startup/data protection.
Identifies and explains the camera's power input, battery holder, and accessory mounting points.
Details the microphone input jack, audio level controls, and input selection switches.
Describes controls like ND filter, shutter switch, auto white balance, and gain selector.
Covers inserting, removing, and handling P2 cards, including status indicators and accidental erasure prevention.
Guides users through the process of adjusting white and black balance for optimal video quality.
Details how to set the shutter mode and speed, including synchro scan and slow shutter options.
Covers selecting audio input signals and manually adjusting recording levels for channels 1 and 2.
Describes using batteries or external DC power supplies for camera operation.
Provides instructions for attaching the lens, securing the cable, and adjusting the lens flange back.
Introduces clip data and outlines manipulations like playback, delete, copy, and metadata editing.
Explains how to navigate and use the camera's setup menus for various settings.
Covers core system settings like SYSTEM MODE, REC SIGNAL, REC FORMAT, and CAMERA MODE.
Covers special recording modes like interval, one-shot, loop, and pre-recording, along with TC and UB settings.
Details settings for microphone low-cut filters, limiters, auto level control, and test tones.
Explains using the USB 2.0 connector for connecting to computers and external storage devices.
Details how to connect to a hard disk drive for saving card data, viewing thumbnails, and writing back data.
Covers connecting devices via the IEEE1394 interface for recording signals and control.
Provides a checklist for ensuring the camera system is operating correctly before starting a shoot.
Covers checks for P2 card recording, audio level adjustments, and earphone/speaker functionality.
Explains the various warning indicators, lamps, tones, and error messages for troubleshooting.
