30
Checking scenes taken (REC CHECK)
In the shooting pause mode, press the REC
CHECK button.
A few seconds of the last thing you shot play, and
then the camera returns to the shooting pause
mode.
• The REC CHECK function cannot be used
unless the recording is at least one second long.
• When recording backup images by connecting
the equipments using a 1394 cable, the images
will not appear during REC CHECK.
• The REC CHECK function does not work when
VCR or DUB has been selected as the operation
mode.
Remove the cassette tape
1 Slide the OPEN/EJECT switch in the
direction shown by the arrow to open the
cassette cover.
• The cassette holder opens automatically.
• The cassette holder will not open if the
camera is not supplied with power (AC
adapter or battery).
• A tape cannot be ejected in P2 mode or
during recording in TAPE mode.
2 Remove the cassette.
3 Press PUSH to close the cassette holder.
• Close the cassette cover only after the
cassette holder is completely in position.
TAPE
1
P
U
S
H
23
P
U
S
H
PUSH
Basic shooting operations (Cassette tape) (continued)
To Next Page
Loading...
