Panasonic AG-UX90 - Record Mode Settings; Audio Input Settings

12
2-2. Record mode settings
Set the record file format type, frequency, etc. with MENU > “SYSTEM MODE” where the following
menu items are available.
MENU > SYSTEM MODE
- SYSTEM FREQ : 59.94Hz or 50.00Hz (AG-UX180 only)
- REC MODE : MOV, MP4 or AVCHD
- REC FORMAT : Choose a combination of the number of pixels and bitrate (see P.66)
2-3. Audio input settings
The AG-UX series can handle up to 2 channels of audio and record them.
1. Set CH SELECT switches (A) for audio source selection (built-in MIC / external)
2. When external input is chosen, set attenuation type (LINE, MIC) and phantom powering option
with INPUT1/2 switches (B). Input levels for LINE and MIC inputs can be set with MENU >
AUDIO SETUP.
3. Set record level adjustment mode (AUTO / MANUAL) with MENU > AUDIO LEVEL CH1/CH2.
Audio record level can be set with the AUDIO LEVEL knob (c) when set to MANUAL.
2. Preparation before shooting
(A)
(B)
(C)
Audio level meter
AUDIO LEVEL CH1 / CH2 knob