Panasonic AG-UX90 - Disp Setup

30
DISP SETUP
Menu item
Description
Value (Factory default setting underlined)
ZEBRA DETECT1
Set the zebra pattern
(right downward).
50% - 80% - 105%
ZEBRA DETECT2
Set the zebra pattern
(right upward).
50% - 100% - 105%
MARKER
Display the spot meter
marker.
ON / OFF
GUIDE LINES
Select and show the guide
line pattern.
/ / / OFF
SAFETY ZONE
Select and show the safety
zone marker.
16:9 90% / 4:3 / 14:9 / 1.85:1 / 2:1 /
2.35:1 / 2.39:1 / OFF
*The following items can be selected
when SA576i mode is selected and
“SIDE CROP” is selected for the
ASPECT CONV menu item.
 4:3 90% / 4:3 / OFF
CENTER MARKER
Show the center marker.
ON / OFF
REC COUNTER
Set the counting method of
record counter.
TOTAL / SCENE
FOCUS DISPLAY
Set the unit of focus position
to be displayed.
NUMBER / feet / m / OFF
ZOOM DISPLAY
Set the unit of zoom position
to be displayed.
NUMBER / mm / OFF
VIDEO OUT OSD
Show the EVF characters on
an external video monitor.
ON / OFF
DATE/TIME
Set the display format of
date and time.
OFF / TIME / DATE / DATE&TIME
DATE FORMAT
Set the display format of
calendar.
Y/M/D, M/D/Y, D/M/Y
LEVEL GAUGE
Show a level gauge to check
the pitch and roll levels.
ON / OFF
HISTOGRAM
(AG-UX90 only)
Display distribution of
brightness of the image for a
quick check of exposure.
The histogram chart consists
of “brightness” on the
horizontal axis, and
“frequency of appearance”
on the vertical axis.
ON / OFF
AUDIO LEVEL
METER
Show audio level meter.
ON / OFF
LENS STATUS
Show the following item
information.
Zoom, OIS, Iris, Gain, ND
filter position, focus position,
white balance, shutter speed
etc.
ON / OFF
CARD&BATTERY
Show remaining time of SD
card and battery.
ON / OFF
3. MENU settings