- 114 -
Motion pictures or still pictures recorded with this unit can be copied between SD Cards inserted in
this unit.
≥ Copying is not possible if the type of the source SD card (SDHC Memory Card/SDXC Memory
Card) is different from that of the target SD card.
∫ Check the used space of the copy destination
It is possible to check the used space of the SD Card by [MEDIA STATUS]. (l 174)
≥ By displaying in 1 scene, recording date and time can be checked when playing back motion
pictures, and recording date and file number when playing back still pictures.
≥ Depending on the media condition, some remaining capacity of the SD Card may not be used.
1 Press the THUMBNAIL button to switch this unit to the Playback Mode.
≥ Use a sufficiently charged battery or the AC adaptor.
2 Select the menu.
3 Touch desired items following the screen display.
≥ It will return to the previous step by touching [Return].
≥ (When [SELECT SCENES] is selected)
When touched, the scene/still picture is selected and the indication appears on the
thumbnail. Touch the scene/still picture again to cancel the operation.
≥ (When [SELECT DATE] is selected)
When touched, the date is selected and surrounded by red. Touch the date again to cancel the
operation.
≥ Up to 99 scenes/still pictures or 99 dates can be set in succession.
4 Touch [EXIT] when the copy complete message is displayed.
≥ The thumbnail view of the copy destination is indicated.
When you stop copying halfway
Touch [CANCEL] while copying.
Editing
Copying between SD cards
Copying
: [COPY] # [SELECT COPY]
[]:Copies from card 1 to card 2
[]:Copies from card 2 to card 1
[ ]*: Copies from card 1 to an external media device
[]*: Copies from card 2 to an external media device
* Displayed only when the external media is connected. (l 125)
MENU
AG-UX90EJ_DVQP1150ZA.book 114 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
