EasyManua.ls Logo

Panasonic AG-UX90 - Connecting to a PC (File Transfer;Nonlinear Editing); Operating Environment (Mass Storage); If Using Mac

Panasonic AG-UX90
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 121 -
When this device and a computer for editing are connected using a USB 3.0 Cable (commercially-
available), image data in the SD card can be transferred.
This unit supports USB 3.0.
Concerning non-linear editing, refer to the instruction manual of your editing software.
It is impossible to write data to the SD card on this unit from a PC.
Operating environment (mass storage)
Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs
cannot be used.
The USB equipment operates with the driver installed as standard in the OS.
If using Windows
If using Mac
Linking to external devices
Connecting to a PC
(File transfer/nonlinear editing)
OS Windows 10 (32 bit/64 bit)
Windows 8.1 (32 bit/64 bit)
Windows 7 (32 bit/64 bit) SP1
CPU 1 GHz or higher
32-bit (k86) or 64-bit (k64) processor
RAM 2 GB or more (64 bit)/1 GB or more (32 bit)
Interface USB port
Other requirements Mouse or equivalent pointing device
PC Mac
OS OS X v10.11
CPU Intel Core 2 Duo or better
RAM 2 GB or more
Interface USB port
Other requirements Mouse or equivalent pointing device
AG-UX90EJ_DVQP1150ZA.book 121 ージ 016年10月20日 木曜日 午前11時44分

Table of Contents

Other manuals for Panasonic AG-UX90

Related product manuals