- 133 -
∫ Configuring the wireless LAN settings (IP address, etc.)
1 Select the menu.
2 Touch and set the desired items as needed.
≥ All default settings are indicated with underlined text.
≥ If you make a connection with [WIRELESS SETUP] set to [DIRECT], the [Gateway] setting will be
disabled.
≥ [IP Address], [Subnet Mask], and [Gateway] cannot be set when [DHCP] is set to [CLIENT].
≥ [MAC Address] cannot be changed.
≥ For details on how to enter characters, refer to page 132.
3 Touch [EXIT].
≥ A connection cannot be made unless the combination of the IP address, subnet mask, and
gateway are correct.
≥ When not using the gateway, set it to [0.0.0.0].
≥ When [DHCP] is set to [OFF] or [CLIENT], apply the [IP Address] setting to [AG ROP] in
[Settings] on the iPad. For details, refer to [CONNECTION] in Help of the AG ROP app.
: [NETWORK SETUP] # [Wireless LAN setup]
[IP Address]: Enter the IP address.
≥ The default setting is [192.168.0.1].
[Subnet Mask]: Enter the subnet mask.
≥ The default setting is [255.255.255.0].
[Gateway]: Enter the gateway.
≥ The default setting is [192.168.0.254].
[DHCP]: [OFF]: Disables automatic retrieval by DHCP and the DHCP
server function.
[CLIENT]: Performs automatic retrieval by DHCP when
connecting with [WIRELESS SETUP] set to
[SSID(SELECT)] or [SSID(MANUAL)].
[SERVER]: Enables the DHCP server function when connecting
with [WIRELESS SETUP] set to [DIRECT].
[MAC Address]: Displays the MAC address.
MENU
AG-UX90EJ_DVQP1150ZA.book 133 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
