- 136 -
≥ Depending on your environment, the communication speed may become slower or the wireless
access point may not be available for use.
≥ When [DHCP] in [Wireless LAN setup] is set to [OFF] or [CLIENT], apply the [IP Address] setting
to [AG ROP] in [Settings] (l 133) on the iPad. For details, refer to [CONNECTION] in Help of the
AG ROP app.
∫ Setting up a connection manually
≥ Attach a wireless module that support this unit to the USB HOST terminal of this unit.
(l 131)
≥ Set [USB MODE SELECT] to [HOST]. (l 175)
≥ Set [USB MODE] to [ON]. (l 175)
1 Select the menu.
2 Touch and set the desired items as needed.
≥ All default settings are indicated with underlined text.
≥ When [SSID(MANUAL)] is selected, [BAND] is fixed to 2.4 GHz, and [CHANNEL (2.4GHz)] and
[CHANNEL (5GHz)] are fixed to [AUTO].
≥ For details on how to enter characters, refer to page 132.
3 Touch [EXIT].
4 Check the network connection.
≥ When the connection is complete, is displayed on the screen of this unit.
≥ To terminate the connection, after terminating the connection on the iPad side, set [USB MODE]
to [OFF].
≥ Depending on your environment, the communication speed may become slower or the wireless
access point may not be available for use.
≥ When [DHCP] in [Wireless LAN setup] is set to [OFF] or [CLIENT], apply the [IP Address] setting
to [AG ROP] in [Settings] (l 133) on the iPad. For details, refer to [CONNECTION] in Help of the
AG ROP app.
: [NETWORK SETUP] # [WIRELESS SETUP]# [SSID(MANUAL)]
[SSID]: Enter the SSID for the wireless access point to connect to.
≥ This item is not set by default.
[SECURITY TYPE]: Set the network authentication and encryption types.
[WPA2-AES
]/[WPA-AES]/[WPA2-TKIP]/[WPA-TKIP]/[NONE]
[Password]: Enter the password for the wireless access point to be connected.
≥ This item is not set by default.
≥ This item is not available when [SECURITY TYPE] is set to [NONE].
MENU
AG-UX90EJ_DVQP1150ZA.book 136 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
