- 137 -
∫ Connecting from History
Connections made to wireless access points are saved in History. Connecting from History allows
you to easily connect with the same settings as used previously.
≥ Attach a wireless module that support this unit to the USB HOST terminal of this unit.
(l 131)
≥ Set [USB MODE SELECT] to [HOST]. (l 175)
≥ Set [USB MODE] to [ON]. (l 175)
1 Select the menu.
2 Touch the item you want to connect to.
≥ Connection records in History will be displayed as SSIDs of wireless access points.
≥ Touch [DELETE] to clear the selected history data.
3 Touch [EXIT].
4 Check the network connection.
≥ When the connection is complete, is displayed on the screen of this unit.
≥ To terminate the connection, after terminating the AG ROP application connection, set [USB
MODE] to [OFF].
≥ Up to 20 most recently used connections can be stored in History.
≥ [CONNECTION HISTORY] is available only when [USB MODE] is set to [ON], [USB MODE
SELECT] is set to [HOST] and a wireless module that supports this unit is attached.
: [NETWORK SETUP] # [CONNECTION HISTORY]
MENU
AG-UX90EJ_DVQP1150ZA.book 137 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
