Panasonic AG-UX90 - Page 142

- 142 -
This adjusts the color balance for [Ach] or [Bch] of the White Balance mode. You can also set
whether or not to apply the color balance settings to Auto White Balance/Auto Black Balance.
1 Touch [RB GAIN CONTROL SETTING], and select the desired item.
2 Touch the desired setting item.
3
(If you have touched [R GAIN]/[B GAIN] in Step 2)
Touch / to adjust the color balance.
≥ You can select a value between s30 and r30.
≥ Touch [RETURN].
(If you have touched [GAIN OFFSET] in Step 2)
Touch [ON] or [OFF].
≥ To make additional changes, repeat Steps 2s3.
4 Touch [EXIT] to exit the menu screen.
≥ The default settings that are assigned to [F1:] in [FILE SELECT] are as follows:
j [R GAIN]: “0”
j [B GAIN]: “0”
j [GAIN OFFSET]: [OFF]
[RB GAIN CONTROL SETTING]
[AWB A]: Setting for the White Balance mode [Ach]
[AWB B]: Setting for the White Balance mode [Bch]
[R GAIN]: Adjusts the intensity of red.
[B GAIN]: Adjusts the intensity of blue.
[GAIN OFFSET]: Sets whether to maintain or reset the [R GAIN] and [B GAIN] settings
when Auto White Balance/Auto Black Balance is used.
[ON]: Maintains the [R GAIN] and [B GAIN] settings when Auto White Balance/Auto
Black Balance is used.
[OFF]: Resets the [R GAIN] and [B GAIN] settings when Auto White Balance/Auto Black
Balance is used.
AG-UX90EJ_DVQP1150ZA.book 142 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分