- 152 -
Switch setting
All default settings are indicated with underlined text.
Sets the rotation direction and iris control of the iris ring.
Sets the gain value for the [LOW GAIN] position of the GAIN button.
1 Touch [LOW GAIN].
2 Touch / to adjust settings.
≥ You can select [AUTO] or a value between 0 dB and 30 dB.
When [EXTENDED SENSITIVITY] is set to [ON], you can set a value between -3 dB and 30 dB.
(l 149)
3 Touch [EXIT] to exit the menu screen.
≥ This function’s default setting is “0 dB”.
≥ When a negative gain value (a value between -3 dB and -1 dB) is selected, if you set
[EXTENDED SENSITIVITY] to [OFF] and operate the GAIN button, the gain value will be set to
0 dB. However, the [LOW GAIN] setting will be maintained.
Sets the gain value for the [MID GAIN] position of the GAIN button.
1 Touch [MID GAIN].
2 Touch / to adjust settings.
≥ You can select [AUTO] or a value between 0 dB and 30 dB.
When [EXTENDED SENSITIVITY] is set to [ON], you can set a value between -3 dB and 30 dB.
(l 149)
3 Touch [EXIT] to exit the menu screen.
≥ This function’s default setting is “6 dB”.
≥ When a negative gain value (a value between -3 dB and -1 dB) is selected, if you set
[EXTENDED SENSITIVITY] to [OFF] and operate the GAIN button, the gain value will be set to
0 dB. However, the [MID GAIN] setting will be maintained.
: [SW SETUP] # desired setting
[IRIS RING]
[DOWN OPEN]: Iris will open when it is turned toward B.
[UP OPEN]: Iris will open when it is turned toward A.
1 Iris ring
[LOW GAIN]
[MID GAIN]
MENU
A
B
AG-UX90EJ_DVQP1150ZA.book 152 ページ 2016年10月20日 木曜日 午前11時44分