Panasonic AG-UX90 - Page 166

- 166 -
If you set this item to [ON], you can reduce the audio noise of audio channel 1.
It will record with natural sound when set to [OFF]. (l 74)
≥ Set [AUDIO LEVEL CH1] to [MANUAL]. (l 73)
If you set this item to [ON], you can reduce the audio noise of audio channel 2.
It will record with natural sound when set to [OFF]. (l 74)
≥ Set [AUDIO LEVEL CH2] to [MANUAL]. (l 73)
Sets the input level of the audio equipment connected to AUDIO INPUT1 terminal (XLR 3 pin).
Sets the input level of the audio equipment connected to AUDIO INPUT2 terminal (XLR 3 pin).
Sets the input level of the external microphone connected to AUDIO INPUT1 terminal (XLR 3 pin).
Sets the input level of the external microphone connected to AUDIO INPUT2 terminal (XLR 3 pin).
[AUDIO ALC CH1]
[ON]/[OFF]
[AUDIO ALC CH2]
[ON]/[OFF]
[INPUT1 LINE LEVEL]
[+4dBu]/[0dBu]
[INPUT2 LINE LEVEL]
[+4dBu]/[0dBu]
[INPUT1 MIC LEVEL]
[-40 dB]/[-50 dB]/[-60 dB]
[INPUT2 MIC LEVEL]
[-40 dB]/[-50 dB]/[-60 dB]
AG-UX90EJ_DVQP1150ZA.book 166 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分