- 170 -
You can check if the image is level while recording motion pictures and still pictures. The function
can also be used to estimate the balance of the composition.
≥ The guidelines do not appear on the images actually recorded.
≥ The setting changes as follows when using Focus Assist. (l 56)
j The guidelines are not displayed. (They are displayed on the external monitor when this unit is
connected to the external monitor.)
j The setting cannot be changed.
Display of the range that can be displayed with the external monitor (safety zone A) can be
switched.
* When [REC FORMAT] is set to [SA 576/50.00i] and [ASPECT CONVERT] is set to [SIDE CROP]
(l 147, 149)
≥ The safety zone is not displayed on the images that is actually recorded.
Displays/hides the center marker.
Selects the operation of the Recording Counter during recording. (l 78)
[GUIDE LINES]
///[OFF]
[SAFETY ZONE]
(When [16:9 90%] is set)
Aspect ratio [SAFETY ZONE]
16:9
[16:9 90%
]/[4:3]/[14:9]/[1.85:1]/[2:1]/
[2.35:1]/[2.39:1]/[OFF]
4:3
*
[4:3 90%]/[4:3]/[OFF]
[CENTER MARKER]
[ON]/[OFF]
[REC COUNTER]
[TOTAL]/[SCENE]
AG-UX90EJ_DVQP1150ZA.book 170 ページ 2016年10月20日 木曜日 午前11時44分