- 175 -
Touch screen operation, start and stop of recording can be confirmed with this sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
2 Beeps for 4 times
When an error occurs. Check the message displayed on the screen. (l 184)
When about 5 minutes have passed without any operation, this unit automatically turns off to save
battery life.
≥ This unit will not automatically turn off even if the [ECONOMY (BATT)] is set to [ON] in following
cases:
j PRE-REC is used (l 91, 164)
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (l 122)
When connected to AC adaptor about 15 minutes have passed without any operation, this unit
automatically turns off.
≥ This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in following
cases:
j PRE-REC is used (l 91, 164)
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (l 122)
Enable/disable connections to the USB terminals of this unit. (l 96)
The unit’s USB terminal to which a USB Cable will be connected can be switched.
Switch the terminal according to the shape of the USB Cable’s plug you intend to connect to the
unit.
[ALERT SOUND]
[OFF]/ (Volume low)/ (Volume high)
[ECONOMY (BATT)]
[ON]/[OFF]
[ECONOMY (AC)]
[ON]/[OFF]
[USB MODE]
[ON]/[OFF]
[USB MODE SELECT]
[HOST]: For connecting to the USB HOST terminal (Type A) of the unit
[DEVICE]: For connecting to the USB DEVICE terminal (Type Micro-B) of the unit
AG-UX90EJ_DVQP1150ZA.book 175 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
