Panasonic AG-UX90 - LCD Monitor Adjustment

- 35 -
LCD monitor adjustment
≥ These settings will not affect the images actually recorded.
This makes it easier to view the LCD monitor in bright places including outdoors.
Select the menu. (l 40)
≥ When the AC adaptor is in use, [POWER LCD] is set to [+1] automatically.
≥ [0] is selected when:
j [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (l 121)
≥ This item is not available while the LCD monitor is turned off.
It adjusts brightness and color density on the LCD monitor.
1 Select the menu. (l 40)
2 Touch the desired setting item.
3 Touch / to adjust settings.
≥ You can select a value between s16 and r16.
4 Touch [RETURN].
≥ Touch [EXIT] to exit the menu screen.
≥ This item is not available while the LCD monitor is turned off.
[POWER LCD]
: [DISP SETUP] # [POWER LCD] #
[+1] (Makes brighter)/[0] (Normal)/[-1] (Makes less bright)
[LCD SET]
: [DISP SETUP] # [LCD SET]
[COLOR]: Color level of the LCD monitor
[BRIGHTNESS]: Brightness of the LCD monitor
[CONTRAST]: Contrast of the LCD monitor
MENU
MENU
AG-UX90EJ_DVQP1150ZA.book 35 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分