Panasonic AG-UX90 - Formatting Media; Recording Motion Picture

- 42 -
Formatting media
If you use the SD cards for the first time for recording with this unit, format the cards.
Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC etc. (l 121)
≥ When using two SD cards, format both SD cards.
1 Select the menu.
2 Touch [SD CARD 1] or [SD CARD 2].
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
≥ Before turning on this unit, open the lens cover. (l 20)
1 Change the mode to
Recording Mode. (l 31)
≥ Extract the LCD monitor.
2 Press the recording start/
stop button B to start
recording.
≥ Recording will stop when you press
the recording start/stop button again.
: [OTHER FUNCTION] # [FORMAT MEDIA]
Use this unit to format media.
Do not format an SD card using any other equipment such as a PC. Otherwise it may not
be possible to use the card on this unit.
Recording
Recording motion picture
A When you begin recording, REC (red) is
displayed.
MENU
REC

ON
OFF

AG-UX90EJ_DVQP1150ZA.book 42 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分