- 49 -
When [i.Zoom] is set to [ON], you can zoom in while maintaining the beauty of high-definition picture
quality up to a magnification of approx. 25k.
≥ Set [REC FORMAT] to a setting with a picture size of 1920k1080 or below. (l 147)
Select the menu.
≥ You can also use i.Zoom by registering [i.ZOOM] to a USER button. (l 93)
≥ The zoom magnification display will change.
(Example)
j iZ00 to iZ99: magnification levels that fall in the optical zoom range
j Z99: i.Zoom
≥ This function is not available in the following cases:
j In Variable Frame Rate Mode (l 91)
j When [REC FORMAT] is set to a setting with a size of UHD (3840k2160)
j During Freeze Frame (l 86)
When [FAST ZOOM] is set to [ON], you can use Fast Zoom while operating the zoom with the zoom
lever.
1 Select the menu.
2 Push the zoom lever fully to operate the zoom.
≥ The zoom magnification display changes when using Fast Zoom. (Example: 99)
∫ About the zoom speed
≥ The zoom speed will vary depending on how far the zoom lever is pressed or how fast the zoom
ring is rotated.
≥ The zoom operation using the sub zoom lever will be performed at a constant speed. Zoom
speed of the sub zoom lever will vary depending on the setting of [SUB ZOOM]. (l 158)
≥ You can also use Fast Zoom by registering [FAST ZOOM] to a USER button. (l 79)
≥ The sound of the zoom mechanism becomes louder than usual during fast zoom operation. This
may cause the sound to be recorded during recording.
≥ Depending on the subject, Auto Focus may not track it when Fast Zoom is in use.
Utilizing the USER button
Digital zoom can be used by setting the USER button. (l 84)
≥ Please refer to page 79 for details about setting the USER button.
Using the i.Zoom
: [SW SETUP] # [i.Zoom] # [ON]
Using Fast Zoom
: [SW SETUP] # [FAST ZOOM] # [ON]
AG-UX90EJ_DVQP1150ZA.book 49 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
