- 68 -
Switch to Low Light mode, which is suited to recording under low light.
≥ Register “Low Light mode” to a USER button. (l 79)
≥ Slide the AUTO/MANU switch to switch to Auto Mode.
Press the applicable USER button or touch the applicable USER button icon.
≥ This unit works in the following manner in Low Light mode:
j [LOW LIGHT] is displayed on-screen.
j The White Balance, iris, gain, and shutter speed are adjusted automatically.
j The shutter speed will be set to 1/25 or slower.
j The range within which the gain value is adjusted is determined by the [REC FORMAT] setting.
[REC FORMAT] settings with a size indicated as UHD (3840k2160): up to 30 dB
[REC FORMAT] settings with a picture size of 1920k1080 or below: up to 36 dB
≥ It is also possible to switch to this mode by selecting menu items as follows:
j [SYSTEM MODE] # [LOW LIGHT MODE] (l 149)
≥ This function is not available in the following cases:
j In manual mode
j During Freeze Frame (l 86)
j When this unit is connected to the AG ROP application (l 134)
≥ This mode is canceled if one of the following operations is performed:
j If you turn the unit off
j If you switch the AUTO/MANU switch
≥ The following functions are disabled during Low Light mode:
j Iris adjustment (l 64)
j Gain adjustment (l 66)
j Shutter speed adjustment (l 69)
j Backlight Compensation (l 82)
j Spotlight (l 83)
Low Light mode
AG-UX90EJ_DVQP1150ZA.book 68 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
