- 74 -
ALC can reduce audio noise. For audio channel 1, select [AUDIO ALC CH1]: for audio channel 2,
select [AUDIO ALC CH2].
1 Set [AUDIO LEVEL CH1]/[AUDIO LEVEL CH2] to [MANUAL]. (l 73)
2 Select the menu.
∫ To set the ALC function to both audio channels 1 and 2
If you set [AUDIO ALC LINK] to [ON], when ALC works for either of the audio channels, it will also
work for the other audio channel.
1 Set [AUDIO LEVEL CH1]/[AUDIO LEVEL CH2] to [MANUAL]. (l 73)
2 Set [AUDIO ALC CH1]/[AUDIO ALC CH2] to [ON].
3 Select the menu.
Using the ALC function
: [AUDIO SETUP] # [AUDIO ALC CH1] or [AUDIO ALC CH2] # desired setting
[ON]: Enables ALC, allowing you to record audio with reduced noise.
[OFF]: Allows you to record natural-sounding audio.
: [AUDIO SETUP] # [AUDIO ALC LINK] # [ON]
AG-UX90EJ_DVQP1150ZA.book 74 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
