Panasonic AG-UX90 - Setting the Recording Counter

- 78 -
Setting the Recording Counter
Recording Counter will display the recording time in seconds.
0:00:00 (hour : minute : second (When [REC COUNTER] is set to [TOTAL]))
SCN 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [SCENE]))
Select the counting method during the recording.
Select the menu.
To reset the Recording Counter for the Recording Mode
The Recording Counter will be set to 0:00:00 when the RESET button is pressed while displaying
the counter.
[REC COUNTER]
: [DISP SETUP] # [REC COUNTER] # desired setting
[TOTAL]: The count continues to increase until the Recording Counter is reset.
[SCENE]: Resets the Recording Counter at start of recording. Counts the time
of each recording session.
MENU
AG-UX90EJ_DVQP1150ZA.book 78 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分