Panasonic AG-UX90 - Recording Check; Last Scene Delete

- 85 -
≥ Register “Focus Assist 2” to a USER button. (l 79)
You can set the Focus Assist. (l 56)
≥ You can set the Focus Assist method in [FOCUS ASSIST 2] in the [SW SETUP] menu.
≥ When [FOCUS ASSIST 1] in the [SW SETUP] menu is set to [BOTH], the USER button is
disabled.
≥ Register “Recording Check” to a USER button. (l 79)
Approximately 2 seconds at the end of the video recorded last can be played back. It will return to
recording screen once the playback is completed.
≥ Playback operation is not possible during the Recording Check.
≥ Recording Check is not possible in following cases:
j When the unit is turned on/off
j When the THUMBNAIL button is pressed
j When the SD card is inserted/removed
j When the setting of [REC FORMAT] is changed (l 147)
j Set [2 SLOTS FUNC.] to [SIMULTANEOUS]. (l 161)
j PRE-REC is used (l 91, 164)
j During the Interval Recording (l 162)
j During Freeze Frame (l 86)
≥ Register “Last Scene Delete” to a USER button. (l 79)
The motion picture recorded last can be deleted.
Deleted scenes cannot be restored.
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [YES].
≥ It will return to recording screen without deleting by touching [NO].
≥ Last Scene Delete is not possible in following cases:
j When the unit is turned on/off
j When the THUMBNAIL button is pressed
j When the SD card is inserted/removed
j When the setting of [REC FORMAT] is changed (l 147)
j Set [2 SLOTS FUNC.] to [SIMULTANEOUS]. (l 161)
j During the Interval Recording (l 162)
Focus Assist 2
Recording Check
Last Scene Delete
AG-UX90EJ_DVQP1150ZA.book 85 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分