32
OTHER FUNCTIONS
Value (Factory default setting underlined)
SD cards and external drives
can be formatted.
Show remaining record time of
SD cards.
PICTURE
MEDIASELECT
(AG-UX180 only)
Select card slot to store still
pictures.
Set the tally lamp to be used
during the recording.
FRONT / REAR / BOTH / OFF
Set the time difference
between the current location
and Greenwich Mean Time
(GMT).
Set the beep alert volume,
which occurs when touching
the screen or starting/stopping
recording.
Turn ON/OFF the economy
mode, which automatically
turns power OFF when no
operation is detected for five
minutes while the camera is
battery-powered.
ON / OFF
*It does not function under the following
conditions.
-PRE-REC is activated
-While in USB connection mode
Turn ON/OFF the economy
mode, which automatically
turns power OFF when no
operation is detected for 15
minutes while AC-powered.
ON / OFF
*It does not function under the following
conditions.
-PRE-REC is activated
-While in USB connection mode
SYSTEM FREQ
(AG-UX180 only)
Enable/disable the USB
connection mode
HOST / DEVICE
HOST: When connect to external storages.
DEVICE: When connect to PC/Mac.
Restore the product to factory
settings.
ALL / SCENE / NETWORK / NO
SCENE: Initializes customized scene files
only.
Return the clip number to
“0001” when MOV/MP4 files or
still pictures are recorded next
time.
Show license information on a
PC connected via USB
interface.
License information can be viewed on the
PC with “LICENSE.txt” generated from the
camera.