- 139 -
Refer to page 40 for how to set up the Menu.
Scene file
Settings that are assigned to [F1:] in [FILE SELECT] by default are indicated with underlined text.
You can save the desired image settings to each scene number. Switch the scene number in
accordance with the recording conditions.
1 Touch [FILE SELECT].
2 Touch / to select the scene number.
≥ Touch [EXIT] to exit the menu screen.
3 (To change the image settings)
Change the setting of [SCENE FILE] menu.
≥ You can save the settings of the following menu items to the scene number you have selected.
(l 140 to 146)
j [MASTER DETAIL]
j [DETAIL CORING]
j [SKIN TONE DTL]
j [V DETAIL LEVEL]
j [RB GAIN CONTROL SETTING]
j [CHROMA LEVEL]
j [CHROMA PHASE]
j [MATRIX]
j [MASTER PED]
j [GAMMA MODE]
j [BLACK GAMMA]
j [KNEE MODE]
j [KNEE MASTER POINT]
j [KNEE MASTER SLOPE]
j [DRS]
j [DRS EFFECT]
j [AUTO IRIS LEVEL]
j [AUTO IRIS LEVEL EFFECT]
j [NR CONTROL]
Default scene number settings
≥ This function’s default setting is [F1:].
Menu
Using the Menu
: [SCENE FILE] # desired setting
[FILE SELECT]
[F1:]/[F2:FLUO]/[F3:SPARK]/[F4:STILL]/[F5:CINE V]/[F6:CINE D]
MENU
[F1:] Setting appropriate for standard recording
[F2:FLUO] Setting appropriate for recording considering the characteristic of fluorescent lamps
(indoors, etc.)
[F3:SPARK]
Setting appropriate for recording with modulation in resolution, color shade, and contrast
[F4:STILL] Setting which allows you to use a scene file with a picture tone similar to that
produced with a digital still camera.
[F5:CINE V] Setting appropriate for recording as a cinema with high contrast
[F6:CINE D] Setting appropriate for recording as a cinema with high dynamic range
AG-UX90EJ_DVQP1150ZA.book 139 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
