Panasonic AG-UX90EJ - Audio Setup

- 165 -
Audio Setup
All default settings are indicated with underlined text.
Reduces the level of low-pitched sound for audio channel 1.
≥ You may not see the full effect depending on the recording conditions.
Reduces the level of low-pitched sound for audio channel 2.
≥ You may not see the full effect depending on the recording conditions.
Switches the adjustment method of the audio recording level for audio channel 1. (l 73)
Switches the adjustment method of the audio recording level for audio channel 2. (l 73)
If you set this item to [ON], when ALC works for either of the audio channels, it will also work for the
other audio channel. (l 74)
≥ Set [AUDIO LEVEL CH1]/[AUDIO LEVEL CH2] to [MANUAL]. (l 73)
≥ Set [AUDIO ALC CH1]/[AUDIO ALC CH2] to [ON]. (l 74)
: [AUDIO SETUP] # desired setting
[AUDIO LOW CUT CH1]
[ON]/[OFF]
[AUDIO LOW CUT CH2]
[ON]/[OFF]
[AUDIO LEVEL CH1]
[AUTO]/[MANUAL]
[AUDIO LEVEL CH2]
[AUTO]/[MANUAL]
[AUDIO ALC LINK]
[ON]/[OFF]
MENU
AG-UX90EJ_DVQP1150ZA.book 165 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分