- 185 -
CANNOT RECORD
- DATE CAPACITY IS
FULL.
This is displayed when you try to
record in excess of the maximum
number of scenes allowed for one
SD card.
≥ The operation will stop.
≥ Replace the SD card or
delete unnecessary
scenes.
Cannot record
- Playlist capacity is full.
INVALID This is displayed when the operation
is invalid.
≥ Before performing the
operation, wait until this
unit is ready for it.
ERROR
- UNABLE TO REPAIR
DATA.
This is displayed when the
management information cannot be
recovered.
≥ Check the SD card.
CANNOT USE SD CARD
IN VIDEO MODE,
CONTROL DATA ERROR.
≥ The operation will stop.
≥ Use another SD card to
perform recording.
CONTROL DATA ERROR
HAS BEEN DETECTED.
(SD CARD)
Defective management information
has been found.
≥ The management
information will be
automatically recovered
after this message is
displayed.
VFR ON,
NO AUDIO RECORDING
Audio cannot be recorded if you
change the frame rate when using
Variable Frame Rate Mode.
≥ To record audio, disable
Variable Frame Rate
Mode.
CANNOT PLAY. This is displayed when an error in
the recording folder name or file
name has occurred, for example.
≥ Check the SD card.
CANNOT PLAY THIS
SCENE ON THIS MODEL.
The scene cannot be played back
because it was recorded with
another device.
≥ Play back the scene with
the device with which it
was recorded.
During thumbnail and menu operation
Display Description Behavior and cause
NO DATA. There are no scenes in the currently
selected recording mode option and
recording format option.
≥ Select a recording mode
option or recording format
option containing recorded
scenes.
CANNOT DELETE. The content versions do not match.
This is displayed when you try to
delete scenes recorded with
another device, for example.
≥ Match the device and
content version.
Display Description Behavior and cause
AG-UX90EJ_DVQP1150ZA.book 185 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
