EasyManua.ls Logo

Panasonic AG-UX90EJ - Warning Indications

Panasonic AG-UX90EJ
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 189 -
When an error is detected immediately after this unit is turned on or while it is being operated, the
status indicator, on-screen displays and the AG ROP application screen (during AG ROP
connection) inform you of the error.
Display
Warning Indications
System error
Status indicator It flashes once per second.
On-screen display s
AG ROP application screen
[ ] flashes four times per
second.
Meaning of the warning
A reference signal error or
communication error has occurred.
Recording/playback The operation stops.
Solution
Turn off and on this unit. If the warning
persists, consult your dealer.
The battery is
depleted
(Low input voltage)
Status indicator It flashes once per second.
On-screen display
The message [LOW BATTERY.] is
displayed.
AG ROP application screen
[ ] lights up.
Meaning of the warning The battery is depleted.
Recording/playback
The operation stops. This unit turns off
automatically.
Solution
Charge or replace the battery.
Connect the AC adaptor to cancel the
warning.
The card is full
Status indicator s
On-screen display
The remaining recordable time flashes
red when it reaches [R 0h00m].
AG ROP application screen
[ ] lights up until you perform
some operation after the recording.
Meaning of the warning The SD card capacity is full.
Recording/playback The recording stops.
Solution
Delete unnecessary scenes, or use a
new SD card.
WARNING
WARNING
WARNING
AG-UX90EJ_DVQP1150ZA.book 189 ージ 016年10月20日 木曜日 午前11時44分

Table of Contents

Other manuals for Panasonic AG-UX90EJ

Related product manuals