- 45 -
Automatic Tracking White Balance
The Auto Tracking White (ATW) Balance function of this unit automatically adjusts the White
Balance according to the lighting condition.
If Auto Tracking White Balance does not work correctly, switch to Manual Mode first, and then adjust
the White Balance. (l 60)
Auto Focus
The unit focuses automatically.
≥ Auto Focus does not work correctly in the following situations. Record pictures in the Manual
Focus Mode. (l 52)
j Recording distant and close-up objects at the same time
j Recording a subject behind dirty or dusty window
j Recording a subject that is surrounded by objects with glossy surfaces or by highly reflective
objects
∫ Controls that are disabled in Auto Mode
Certain controls of this unit may be disabled in Auto Mode. Controls to be disabled vary by the
[AUTO SW] menu settings.
[AF]
[ON]: Activates Auto Focus in Auto Mode.
[OFF]: Activates Auto Focus as a manual mode. Focus is adjusted
according to the functions of the FOCUS A/M/¶ switch.
Conditions that disable controls Controls that are disabled in Auto Mode
[A.IRIS] is set to [ON]. Iris Ring, IRIS button
[AGC] is set to [ON]. GAIN button, the USER button to which [SUPER GAIN]
is registered
[AUTO SHUTTER] is set to [ON]. SHUTTER button
[ATW] is set to [ON]. WHITE BAL button
[AF] is set to [ON]. Focus ring, FOCUS ASSIST button, FOCUS A/M/¶
switch, PUSH AUTO button, the USER button to which
[FOCUS ASSIST 1], [FOCUS ASSIST 2] or
[PUSH AUTO] is registered
Menu item Setting
AG-UX90EJ_DVQP1150ZA.book 45 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
