- 50 -
Use the Image Stabilizer to reduce the effects of shake during recording.
This unit is equipped with Hybrid Optical Image Stabilizer.
Hybrid Optical Image Stabilizer is a hybrid of Optical and Electrical Image Stabilizer.
1 Register [O.I.S.] to a USER button. (l 79)
≥ This function is registered to the USER6 button by default.
2 Press the USER button to which [O.I.S.] is registered or touch the applicable
USER button icon to switch the Image Stabilizer on/off.
≥ You can also access this function by selecting menu items.
[SW SETUP] # [O.I.S.] # [ON]/[OFF]
≥ When [HYBRID O.I.S.] is [ON], is displayed. When [OFF], is displayed.
≥ This item cannot be set during Freeze Frame (l 86)
∫ Changing Image Stabilizer Mode
Select the menu.
When set to [ON], you can further improve image stabilization for holding the unit and recording a
distant subject with zoom.
≥ Optical Image Stabilizer will be disabled and the setting cannot be changed in the following
cases:
j When Optical Image Stabilizer is set to (setting canceled)
j When the size is set to UHD (3840k2160) in [REC FORMAT] (l 147)
j In Variable Frame Rate Mode (l 91)
≥ The setting cannot be changed during Freeze Frame (l 86)
≥ Stabilization may not be possible under strong shaking conditions.
≥ When using a tripod, we recommend that you set the Image Stabilizer to (setting canceled).
You can customize the Image Stabilizer by adjusting the [BLUR AMPLITUDE] and [BLUR
FREQUENCY] settings individually.
∫ Custom Optical Image Stabilizer
When [ON] is selected, the Image Stabilizer works with customized [BLUR AMPLITUDE] and
[BLUR FREQUENCY] settings.
Select the menu.
Recording
Image Stabilizer Function
/ # (OFF)
: [SW SETUP] # [HYBRID O.I.S.] # [ON] or [OFF]
Customizing the Image Stabilizer for various recording conditions
: [SW SETUP] # [CUSTOM O.I.S.] # [ON]
AG-UX90EJ_DVQP1150ZA.book 50 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
