- 55 -
∫ AF Area Width adjustment
You can adjust the effective area width for Auto Focus according to the size of the subject.
≥ Switch to Auto Focus Mode. (l 52)
1 Select the menu.
≥ To cancel the settings, set [AF AREA WIDTH] to [OFF].
≥ If you push the jog dial in Step 2, the AF area frame turns yellow, allowing you to select
[RETURN]/[EXIT] by rotating the jog dial. Push the jog dial to set the selected item.
≥ You can also adjust AF area width by registering [AF AREA] to a USER button. (l 96)
≥ This function is not available in the following cases:
j In manual focus mode (l 52)
j When using Area Mode (l 87)
j During Freeze Frame (l 86)
One Push AF
If you press the PUSH AUTO button in Manual Focus Mode, the camera performs high-speed
focusing until the image is focused.
≥ Switch to Manual Focus Mode. (l 52)
Press PUSH AUTO button.
≥ Auto Focus will be activated and the camera will perform high-speed focusing until the image is
focused.
≥ The focus setting returns to Manual Focus Mode once the image is focused or a certain time has
elapsed.
≥ You can also use One Push AF with the USER button to which [PUSH AUTO] is registered.
(l 79)
≥ One Push AF does not work in following cases:
j When Auto Focus is used
: [SW SETUP] # [AF AREA WIDTH] # [SET]
2 Push the jog dial.
3 Rotate the jog dial to adjust the AF area
frame.
A [RETURN]
B AF area frame
C [EXIT]
4 Touch [EXIT] to complete the setting.
≥ will be displayed on the screen.
AG-UX90EJ_DVQP1150ZA.book 55 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
