- 62 -
You can customize the ATW settings for various recording conditions by adjusting the settings of
[ATW TARGET R] and [ATW TARGET B] individually.
∫ Fine-adjusting the color balance of ATW
1 Select the menu.
≥ [ATW TARGET R] adjusts the intensity of red.
≥ [ATW TARGET B] adjusts the intensity of blue.
2 Touch / to adjust settings.
≥ You can select a value between s10 and r10.
3 Touch [EXIT] to complete the setting.
You can set ATW Lock by registering [ATW LOCK] to a USER button.
≥ Please refer to page 79 for details about setting the USER button.
1 Set the White Balance mode to [ATW].
2 Press the USER button to which [ATW LOCK] is registered or touch the
applicable USER button icon.
≥ To cancel ATW Lock, press the USER button or touch the USER button icon again. Canceling
ATW Lock will return the White Balance mode back to [ATW].
≥ This function is not available in the following cases:
j When the White Balance mode is set to something other than [ATW]
≥ It will be canceled when the unit is turned off.
Customizing ATW for various recording conditions
: [SW SETUP] # [ATW TARGET R] or [ATW TARGET B]
To set ATW Lock
AG-UX90EJ_DVQP1150ZA.book 62 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分
To Next Page
Loading...
