Panasonic AG-UX90EJ - USER Button; Setting the USER Button

- 79 -
Each of the USER button can register one function from the 40 available functions.
≥ There are 9 USER buttons (USER1 to 9) on the main body and 4 USER button icons (USER10 to
USER13) displayed on the LCD monitor.
Setting the USER button
1 Select the menu.
≥ It is not possible to register functions to [USER10] to [USER13] in Playback Mode.
2 Touch the item to register.
≥ For the functions of the USER button that can be registered, refer to page 81.
≥ Touch [INHIBIT] if not registering.
≥ Next (Previous) page can be displayed by touching / .
3 Touch [EXIT] to complete the setting.
≥ The tables below show the default settings.
≥ Performing [ALL] in [INITIAL SET] restores these default settings. (l 176)
Recording
USER button
: [USER SW] # [USER1] to [USER13]
USER1 button [AREA] USER8 button [REC CHECK]
USER2 button [FOCUS MACRO] USER9 button [AWB]
USER3 button [SLOT SEL] USER10 button [FRZ FRAME]
USER4 button [LOW LIGHT] USER11 button [BACKLIGHT]
USER5 button [ZEBRA] USER12 button [ATW LOCK]
USER6 button [O.I.S.] USER13 button [MENU]
USER7 button [LCD/EVF OUTPUT]
MENU
AG-UX90EJ_DVQP1150ZA.book 79 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分