41
4-7. Understanding Focus transition feature
A new focus transition feature allows users to easily adopt impressive camera work with racking
focus (changing focus of the lens during a shot). This is even available in 4K/UHD mode, where
this would normally be a challenging focus operation if performed manually.
How to operate focus transition
1. Set focus mode to MANUAL.
2. Assign “FOCUS TRANS” to one of the USER assignable buttons (MENU > USER SW).
3. MENU > RECORDING SET UP > FOCUS TRANSITION > SET
4. Choose a preset number and adjust the focus ring. In following figures, focus is set to
foreground and stored in preset 1, and set focus to the plant and stored in preset 2.
5. Press the USER button (“FOCUS TRANS” is assigned) and press preset number buttons (1 to3)
to recall the presets.
4. Understanding advanced features
Focus transition feature will be canceled
with following operations.
- Power OFF
- Switched to thumbnail mode
- Zooming
To Next Page
Loading...
