INF-6
4. Maintenance Schedule
Hours of Use (unit hours)
Part Name Part Number
1,000H 2,000H 4,000H 6,000H 8,000H
10,000H 12,000H
Cleaning of the tape transport
"C": every 500 hours
1 Cylinder Ass’y VEG1498
RRRRRIM
2 Pinch Arm Ass’y VXL2835C
R,Y,G R,Y,G R,Y,G R,Y,G R,Y,G R,Y,G IM
3 Cleaning Arm Ass’y VXL3027C
R,Y R,Y R,Y R,Y R,Y R,Y IM
S Reel Motor Ass’y VEM0629
4
T Reel Motor Ass’y VEM0630
RRIM
5 Thrust Screw Ass’y VXQ0556
R,L R,L IM
6 S1 Loading Arm Ass’y VXL2709
RIM
7 T1 Boat Ass’y VXA6378
RIM
8 S5 Post Base Arm Ass’y VXA7361
RIM
9 Tension Arm Ass’y VXL2831
RIM
S Brake Arm Ass’y VXL2705
10
T Brake Arm Ass’y VXL2706
RIM
11 Mode Switch Ass’y VES0918C
RIM
12 A/C Head VED0419
IM
13 Loading Motor (1) Ass’y VEM0645C
IM
14 Pinch Solenoid VSJ0227
IM
15 S,T Brake Solenoid VSJ0216
IM
16 MIC Sensor Switch Base Ass'y VXA5583C
IM
17 Cleaner Solenoid VSJ0226
IM
18 Main Cam Gear VDG1168
IM
VXY1541(P)
19 Mechanism Ass'y
VXY1573(E/MC)
IM
VXA6361(P)
20 Cassette Compartment Ass'y
VXA6753(E/MC)
IM
Replacement of the mechanism chassis unit is recommended for the 12,000 h maintenance.
“
C
” : Perform cleaning.
“
R
” : Assembly subject to exchange.
“
Y
” : The timing of replacement with Cleaning Arm Unit,
either 1000 hours or 1 year as timing come earlier.
“
G
” : At the time of replacement, wipe off the old grease
and apply new grease. (Molytone Grease)
“
L
” : Lubrication is necessary.
“
IM
” : Included in the mechanical chassis unit
when the mechanical chassis unit is not replaced,
replacement as a single part is required.
<Note:>
The Hours of use indicates the cylinder rotation time
(DRUM RUN).
The maintenance execution time shown in the chart
is recommendation for standard maintenance
execution.
This is not the life of the various parts.
The life is influenced by temperature, humidity, dust,
etc.