INF-21
9-2. Design Menu Screen.
[ DESIGN MENU SCREEN ]
< DESIGN >
MENU ALL INIT.
LUMADLY : 0
ENC : NORM
DEFECT MODE : ON
(STATUS) : OFF
BER ADJ : OFF
BER SPEED : SLOW
CAUTION :
All menu data except FLARE and GAMMA setting will be reset when UP
or DOWN button is pressed
at MENU ALL INIT mode.
ITEM RANGE PRESET REMARK
MENU ALL INIT. ------ ------
Reset all data on all menu (refer to above
sentence). Also reset OPERATION, DRUM and
THEREADING time.
LUMADLY 0 - 3 0
Y signal is delayed against chroma signal.
(At only playback mode)
ENC NORM/BAR/C OFF NORM
Select the output signal mode.
NORM : BAR signal at EE mode, Playback signal
at Playback mode
B A R : Always BAR signal output.
C OFF : Chroma signals OFF (at Playback)
DEFECT MODE ON/OFF ON Not used for this model.
(STATUS) ON/OFF ------ Not used for this model.
BER ADJ ON/OFF OFF
Select the error rate display mode or audio level
display mode on Audio Level Meter.
OFF : Display the Audio Level.
ON : Display the Error Rate.
BER SPEED SLOW/FAST SLOW
Select the error rate display mode.
SLOW : SLOW mode.
FAST : FAST mode.