123
Manipulating Clips with Thumbnails : Formatting SD memory cards
Manipulating Clips with Thumbnails
SD memory cards can also be formatted from the
thumbnail screen. With an SD memory card inserted into
the camera-recorder, perform the following operation:
1 Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2 Press the THUMBNAIL MENU button and select
OPERATION
> FORMAT from the thumbnail menu.
The following screen appears. Select “SD CARD”.
Select “EXIT” if formatting is not required.
3 The following screen appears. Use the cursor buttons
and the SET button to select YES.
4 The SD memory card is formatted.
Note
SD memory cards can also be formatted from the menu
screen. For more information, see [
Handling SD memory
cards] (page 84).
Formatting SD memory cards
AJ-HPX2000P(VQT1D27-1)E.book 123 ページ ２００７年７月３０日 月曜日 午後１時３１分
To Next Page
Loading...
