Panasonic AJ-PX5000G - Color Correction

– 151 –
Chapter 7 Menu Operations — Menu list
[COLOR CORRECTION]
Item Description of settings
[[S] L COLOR CORRECT] Switches [ON]/[OFF] of the 15-axis independent color correction where the <GAIN> switch is on <L>.
[ON], [OFF]
f Factory setting: [ON]
[[S] M COLOR CORRECT] Switches [ON]/[OFF] of the 15-axis independent color correction where the <GAIN> switch is on <M>.
[ON], [OFF]
f Factory setting: [ON]
[[S] H COLOR CORRECT] Switches [ON]/[OFF] of the 15-axis independent color correction where the <GAIN> switch is on <H>.
[ON], [OFF]
f Factory setting: [ON]
[R (SAT)] Corrects red color saturation.
[−63]…[63]
f Factory setting: [34]
[R-R-Mg (SAT)] Corrects the color saturation between red and “colors between red and magenta”.
[−63]…[63]
f Factory setting: [22]
[R-Mg (SAT)] Corrects the color saturation between red and magenta.
[−63]…[63]
f Factory setting: [20]
[Mg (SAT)] Corrects magenta color saturation.
[−63]…[63]
f Factory setting: [6]
[Mg-B (SAT)] Corrects the color saturation between magenta and blue.
[−63]…[63]
f Factory setting: [5]
[B (SAT)] Corrects blue color saturation.
[−63]…[63]
f Factory setting: [0]
[B-Cy (SAT)] Corrects the color saturation between blue and cyan.
[−63]…[63]
f Factory setting: [−3]
[Cy (SAT)] Corrects cyan color saturation.
[−63]…[63]
f Factory setting: [−5]
[Cy-G (SAT)] Corrects the color saturation between cyan and green.
[−63]…[63]
f Factory setting: [0]
[G (SAT)] Corrects green color saturation.
[−63]…[63]
f Factory setting: [6]
[G-Yl (SAT)] Corrects the color saturation between green and yellow.
[−63]…[63]
f Factory setting: [−2]
[Yl (SAT)] Corrects yellow color saturation.
[−63]…[63]
f Factory setting: [14]
[Yl-Yl-R (SAT)] Corrects the color saturation between yellow and “colors between yellow and red”.
[−63]…[63]
f Factory setting: [25]
[Yl-R (SAT)] Corrects the color saturation between yellow and red.
[−63]…[63]
f Factory setting: [28]
[Yl-R-R (SAT)] Corrects the color saturation between “colors between yellow and red” and red.
[−63]…[63]
f Factory setting: [43]
[R (PHASE)] Corrects the red hue.
[−63]…[63]
f Factory setting: [0]
[R-R-Mg (PHASE)] Corrects the hue between red and “colors between red and magenta”.
[−63]…[63]
f Factory setting: [10]
[R-Mg (PHASE)] Corrects the hue between red and magenta.
[−63]…[63]
f Factory setting: [5]
[Mg (PHASE)] Corrects the magenta hue.
[−63]…[63]
f Factory setting: [3]
[Mg-B (PHASE)] Corrects the hue between magenta and blue.
[−63]…[63]
f Factory setting: [4]
[B (PHASE)] Corrects the blue hue.
[−63]…[63]
f Factory setting: [0]