Panasonic AJ-PX5000G - Vf Marker

– 159 –
Chapter 7 Menu Operations — Menu list
Item Description of settings
[VF OUT] Selects the image signal displayed on the viewnder screen.
[Y]: Luminosity signal
[NAM]: Outputs the [R], [G] or [B] signal with the largest level.
[R]: Rch signal
[G]: Gch signal
[B]: Bch signal
f Factory setting: [Y]
[VF DTL] Sets the detail level of the viewnder screen.
Further emphasizes details of the viewnder signal. If [0], the detail is the same as this line.
[0]…[10]
f Factory setting: [5]
[ZEBRA1 DETECT] Sets the ZEBRA1 extraction level (IRE value).
[0%]…[109%]
f Factory setting: [70%]
[ZEBRA2 DETECT] Sets the ZEBRA2 extraction level (IRE value).
[0%]…[109%]
f Factory setting: [85%]
[ZEBRA2] Switches [ZEBRA2] [ON]/[OFF] and selects SPOT.
[ON], [SPOT], [OFF]
f Factory setting: [SPOT]
[LOW LIGHT LVL] Sets how low the amount of light entering the camera must be to display [LOW LIGHT].
[OFF], [10%], [15%], [20%], [25%], [30%], [35%]
f Factory setting: [35%]
[RC MENU DISP.] Sets whether to display the menu on the viewnder screen when the remote control unit or extension
control unit is connected.
[ON], [OFF]
f Factory setting: [ON]
[MARKER/CHAR LVL] Congures settings for the viewnder marker and character luminosity.
[50%], [60%], [70%], [80%], [90%], [100%]
f Factory setting: [50%]
[SYNCHRO SCAN DISP] Sets the unit in which synchro scan mode is displayed.
[sec]: Displays in time.
[deg]: Displays at shutter open angle.
f Factory setting: [sec]
[ZEBRA2]
[ON] [OFF] [SPOT]
[109%]
[ZEBRA2 DETECT]
[ZEBRA1 DETECT]
[0%]
[VF MARKER]
Item Description of settings
[TABLE] Selects the setting table of the marker select function. Check or set the details of [A]/[B] at subsequent
settings.
[A], [B]
f Factory setting: [A]
[CENTER MARK] Controls the center mark.
[1]:+(large)
[2]: Open center (large)
[3]:+(small)
[4]: Open center (small)
[OFF]: Does not display.
f Factory setting: [1]
[SAFETY MARK] Selects the type of frame for the safety zone marker.
[1]: Box
[2]: Corners
[OFF]: Does not display.
f Factory setting: [2]