– 169 –
Chapter 7 Menu Operations — Menu list
[PROPERTY]
Item Description of settings
[CLIP PROPERTY] Detailed clip information is displayed on the screen. Items can be individually corrected. For details, refer
to “Properties” (page 134).
[CARD STATUS] Displays the card status of a card slot. For details, refer to “Thumbnail screen” (page 122).
[CPS PASSWORD] Sets the CPS encrypted password of the microP2 memory card.
[LOAD]: Loads CPS password from an SD memory card.
[SET]: Enters the CPS password.
[DELETE]: Deletes the password saved to the device, and disables encrypted formats.
[SD CARD] Displays SD memory card information.
[REMAIN SETUP] Sets which is displayed, remaining capacity or used capacity, when P2 card information is displayed.
[REMAIN]: Displays remaining capacity.
[USED]: Displays used capacity.
f Factory setting: [REMAIN]
[FREE CAP. OF PARTITION] Displays available space in a partition.
This item is displayed in storage explorer when in USB storage mode ([TYPE S] storage only).
Item Description of settings
[REPOSITION] Selects a clip to be displayed on the thumbnail screen.
[ALL CLIP]: Displays all clips as thumbnails.
[SAME FORMAT CLIPS]: Displays only the clips recorded in the same format as the system format as
thumbnails.
Clips recorded in the same format means that each item of [LINE&FREQ], [REC FORMAT], and [AUDIO
SMPL RES] in the main menu → [SYSTEM] → [SYSTEM MODE] matches the current setting status.
Example) [1080-59.94i], [AVC-I100], [24BIT]
[SELECTED CLIPS]: Displays only the clips selected with the <SET> button as thumbnails. The
thumbnails appear in selected order.
[MARKED CLIPS]: Displays only the clips with shot marks added as thumbnails.
[TEXT MEMO CLIPS]: Displayed only clips with text memo data attached as thumbnails.
[SLOT CLIPS]: Displays only the clips of the selected slot as thumbnails.
[NG CLIPS]: Displays only the clips with the defective clip indicator as thumbnails.
f Factory setting: [ALL CLIP]
[DELETE] Deletes selected clips.
To interrupt the deletion process, press the <SHIFT> button + <EXIT> button, or the <SET> button to
cancel the operation. Once a clip is deleted, it cannot be restored even if the deletion process is aborted.
[FORMAT] When the [FORMAT] menu is selected, format the P2 card in the specied P2 card slot and the SD
memory card in the specied SD memory card slot.
[SLOT 1], [SLOT 2], [SLOT 3], [SLOT 4], [SD CARD]
When a CPS password is set, you can select [NORMAL] (normal unencrypted format) or
[CPS(ENCRYPT)] (encrypted format).
Data deleted as a result of formatting cannot be restored. Always check the data before formatting.
[FORMAT(STORAGE)] Formats a storage device connected to the <USB3.0> terminal (host) using the specied system in USB
storage mode.
[TYPE S]: Formats in the [TYPE S] format.
[FAT]: Formats in the [FAT] format.
Enabled only for storage explorer, storage thumbnail.
Data deleted as a result of formatting cannot be restored. Always check the data before formatting.
[COPY] Copies the selected clip to a P2 card in any P2 card slot, a storage device, or FTP server.
[SLOT 1], [SLOT 2], [SLOT 3], [SLOT 4], [SD CARD], [STORAGE], [FTP], [FTP(PROXY)]
Do not turn power off or remove the card during copying. Doing so will result in defective clips. If a
defective clip is created, delete the clip before copying it again.
Combine incomplete clips before copying.
[EXPORT] Exports (writes) clips from the P2 card or SD memory card to a storage device or FTP server by units of
card.
[ALL SLOT], [SLOT 1], [SLOT 2], [SLOT 3], [SLOT 4]: Exports clips from the P2 card to a storage
device.
[SD CARD]: Exports clips from the SD memory card to the FTP server.
[IMPORT] Imports (writes back) clips etc. from a storage device or FTP server to the P2 card or SD memory card by
units of card.
[SLOT 1], [SLOT 2], [SLOT 3], [SLOT 4], [SD CARD]
Only [TYPE S] is enabled for the storage device.
Only writes back to a card with a serial number matching the original card serial number.
This item is displayed only in storage explorer or FTP explorer.
[REPAIR] Repairs a clip displayed in the defective clip indicator (yellow) occurring as a result of sudden power loss
during recording or other reasons.
Repair may be impossible, depending on how it was damaged. When repair is impossible, a yellow
indicator is displayed.
[RE-CONNECT] If clips that were recorded over multiple P2 cards are not recognized as consecutive clips and the
incomplete clip indicator
is displayed, use this function to restore the clips to the consecutive clips (the
original combined clips).
Incomplete clips are formed in the following cases:
f When clips recorded to multiple P2 cards are copied separately to individual P2 cards.
f When clips recorded to multiple cards are copied separately to individual storage device cards and then
re-written to P2 cards.
Even if only some of the incomplete clips divided into 3 or more are linked, the incomplete clip indicator will
stay on until all of the clips that comprise the original clips are linked.
To Next Page
Loading...
