– 170 –
Chapter 7 Menu Operations — Menu list
Item Description of settings
[EXCH. THUMBNAIL] Changes the clip thumbnail to an image with any text memo. This can be executed while the text memo
clip is displayed.
[EXPLORE] Switches to the information display screen for a storage device or FTP server.
[STORAGE]: Switches to the information display screen for storage device.
[FTP]: Switches to the information display screen for FTP server.
[AUTHENTICATE] When the cursor is placed on the card slot indicated as [AUTH NG CARD] and this menu is selected in the
card status screen, the software keyboard appears to enter the CPS password. If the password is entered
and [OK] is selected, the CPS password is set to the camera.
When the set CPS password is successfully authenticated, the message [AUTHENTICATED
SUCCESSFULLY!] is displayed.
When the set CPS password authentication fails, a warning message (page 247) is displayed.
[CHANGE PARTITION NAME] Sets and changes the storage partition name in USB storage mode.
The initial value is the date and time that the partition was created.
Valid for type S storage only.
Displayed only in storage explorer.
[DELETE LAST PARTITION] Deletes the last storage partition when in USB storage mode.
Can only be deleted when the cursor is in the last partition.
Displayed only in storage explorer.
[DELETE FOLDER] Delete folders in the storage device in the FAT format.
Displayed only in storage explorer.
[THUMBNAIL SETUP]
Item Description of settings
[INDICATOR] Selects an item to display and press the <SET> button. Checked items are displayed. When [ALL HIDE] is
selected, other items cannot be selected.
[ALL HIDE]: Hides all indicators.
[MARKER]: Displays the shot mark indicator.
[TEXT MEMO]: Displays the text memo indicator.
[WIDE]: Displays the wide indicator.
[PROXY]: Displays the proxy indicator.
f Factory setting: [MARKER], [TEXT MEMO], [WIDE], [PROXY]
Defective clip indicator (yellow, red), unknown clip indicator, and incomplete clip indicator are always
displayed, regardless of the settings.
[DATA DISPLAY] Selects the content to display in the time display area.
[TC]: Displays the time code.
[UB]: Displays the user bits.
[TIME]: Displays the record time.
[DATE]: Displays the record date.
[DATE TIME]: Displays the record date and time.
[CLIP NAME]: Displays clip names.
[USER CLIP NAME]: Displays a maximum of the rst 15 letters (for an English language display) of a user
clip name.
[SLOT]: Displays slot number.
[THUMBNAIL TC]: Displays the time code of the thumbnail position.
f Factory setting: [TC]
[THUMBNAIL SIZE] Sets the thumbnail size displayed in a thumbnail on the screen.
[SMALL]: Small (thumbnail display: with 4×3 and property display)
[MEDIUM]: Standard (thumbnail display: 4×3)
[LARGE]: Large (thumbnail display: 3×2)
f Factory setting: [MEDIUM]
[PB POSITION] Sets the playback start position during playback from the thumbnail screen.
[RESUME]: Plays back from the position where playback stopped.
[THUMBNAIL TC]: Plays back from the time code of the thumbnail position.
[START TC]: Plays back from the start time code (beginning of the clip).
f Factory setting: [START TC]
To Next Page
Loading...
