– 243 –
Chapter 10 Maintenance and Inspection — Inspections before shooting
7
Set the <DISPLAY> switch to <UB>.
Check that each time the <HOLD> button is pressed, [VTCG] → [DATE] → [TIME] → no display (time zone) → [TCG] value is displayed and that this
value is accurate.
If [DATE], [TIME], and the time zone is incorrect, set the correct date/time. (page 30).
@@
NOTE
t Note that date and time data based on [DATE], [TIME], and the time zone settings is recorded in the clip and affects the playback order in the
thumbnail operations.
To Next Page
Loading...
