– 250 –
Chapter 10 Maintenance and Inspection — Updating the camera rmware
Updating the camera rmware
There are two ways to update the rmware:
1 Use the dedicated tool P2_Status_Logger to check and apply the update.
Only customers registered as members to PASS (P2 Asset Support System) can log in to PASS to use the dedicated (P2_Status_Logger) tool.
With P2_Status_Logger, you can check the version information of the device used and jump to the page to download the required rmware.
For details about downloading and using P2_Status_Logger, refer to the pages displayed after logging in to PASS.
Other benets are offered to registered users. For details, refer to the website (http://panasonic.biz/sav/pass_e) of PASS (P2 Asset Support
System).
2 Check the version using the camera and apply the update
Check the version of the camera in the main menu → [SYSTEM] → [VERSION], and access the latest information on the rmware from the website
described in NOTE, and then download the rmware as needed.
@@
NOTE
t Update completes by loading the downloaded les to the camera via the SD memory card. For details on update, visit the support desk at the following
website:
http://pro-av.panasonic.net/
To Next Page
Loading...
