Panasonic AJ-PX5000G - Warning and Status Display Section

– 26 –
Chapter 2 Description of Parts — Warning and status display section
Warning and status display section
1
3
4
2 6
7
5
1 Display window
Displays memory-related warnings, battery charge level, audio level, and time data.
@@
NOTE
t If the camera is left with the battery attached, the various data will be displayed on the display window even if the power is turned off. To turn the
display off to save the battery from wearing down, set [OFF] in the main menu → [SYSTEM] → [SYSTEM SETUP] → [P.OFF LCD DISPLAY].
2 <LIGHT> button
Controls lighting of the display window. Each press toggles lighting of the display window on and off.
3 <WARNING> lamp (page 245)
Starts ashing or is illuminated if something unusual occurs in the memory.
4 <USB> lamp
Lights when the camera is in the USB mode.
5 Back tally switch
Controls the action of the back and rear tally lamps.
<ON> Enables the back and rear tally lamps.
<OFF> Disables the back and rear tally lamps.
6 Back tally lamp
When the back tally switch is set to <ON>, the lamp acts in the same way as the front tally lamp at the viewnder.
7 Rear tally lamp
When the back tally switch is set to <ON>, the lamp acts in the same way as the back tally lamp.