Panasonic AJ-PX800G - Menu Structure and Navigation

– 118 –
Chapter 6 Menu Operations — Setting menu structure
Setting menu structure
Menu types and how to open them
Menu type Use How to open
[USER MENU]
In the main menu → [USER MENU SEL], you can select
the desired items and pages and register to [USER
MENU]. You can select them depending on the purpose or
frequency of use to make a unique menu structure.
For details, refer to “Setting [USER MENU]” (page 120).
Displayed by pressing the <MENU> button.
Main menu You can set all items in the setting menu.
The main menu has a structure of categorized layers
according to intended use and setting frequency.
Displayed by pressing and holding the <MENU> button for
three seconds or more.
[OPTION MENU] Menu items are prepared to take into account additional
functions in the future.
Please consult your vendor for more details.
Displayed by pressing the <MENU> button while holding
down the <LIGHT> button.
Main menu structure
[SCENE FILE] Congures the settings for scene les.
This item is used to congure detailed image quality settings of the camera images, to select scene les, and to
congure the settings for reading/writing of scene le data to the internal memory.
This menu item cannot be set when the thumbnail screen is displayed.
[SYSTEM MODE] Congures the settings for the recording format of video and audio.
[USER SW] Sets the function to be assigned to the USER button and the <RET> button of the lens.
[SW MODE] Congures the operations of each mode when switched the mode using each switch.
This menu item cannot be set when the thumbnail screen is displayed.
[RECORDING SETUP] Congures various settings when performing recording and playback.
Set the system frequency, the number of lines, recording format, and recording method.
[CLIP] This item is used to perform various tasks, such as playing back, deleting, and copying clips, and editing metadata,
while checking the thumbnails of the clips displayed in the viewnder.
This menu item is enabled when the thumbnail screen is displayed.
Clip operations such as [DELETE] or [COPY] are enabled when the target thumbnail is selected.
Some items are displayed only in specic situations such as in USB host mode or on the explorer screen.
[AUDIO SETUP] Congures the settings for audio input/output.
[IN/OUT SEL] Congure the settings regarding video output from <SDI OUT/IN (OP)>, <HDMI>, <MON OUT>, and <TC IN/OUT>
terminals.
[NETWORK SETUP] Congures the settings for network.
[DISPLAY SETUP] Congures the settings for the details to be displayed in the viewnder.
This menu item cannot be set when the thumbnail screen is displayed.
[BATTERY SETUP] Congures the settings for the battery.
[CARD FUNCTIONS] Congures the settings for reading/writing of scene les and user les to SD memory cards.
[OTHER FUNCTIONS] Congures the settings for reading/writing of user les to internal memory and initialization, and the camera settings.
[MAINTENANCE] Used for performing maintenance of the camera. This item is used when updating the rmware version of the camera.
[DIAGNOSTIC] Displays the rmware version, product name, serial number, and energized time of the camera.
[USER MENU SEL] Sets the items to be displayed in [USER MENU].