Panasonic AJ-PX800G - [Clip]

– 130 –
Chapter 6 Menu Operations — Menu list
Item Description of settings
[START TEXT MEMO] Selects whether to automatically add a text memo at recording start position each time recording is started.
[ON], [OFF]
f Factory setting: [OFF]
[DF MODE] Sets the counting method of the built-in time code generator.
[DF]: Uses the drop frame mode.
[NDF]: Uses the non-drop frame mode.
f Factory setting: [DF]
[UBG MODE] Selects the user bits mode.
[USER]: Selects the user bits value that has been set.
[TIME]: Selects the local time. (hh, mm, ss)
[DATE]: Selects the local date and time. (YY, MM, DD, hh)
[EXT]: Records the user bits values currently input to the <TC IN/OUT> terminal.
[TCG]: The value of [TCG] is recorded as user bits.
[FRAME RATE]: Selects camera imaging information (such as frame rate).
[REGEN]: Reads the value recorded to the card and continuously records that value.
f Factory setting: [USER]
[VITC UBG MODE] Selects the VITC user bits mode.
[USER/EXT]: When [UBG MODE] is [EXT], follows the value and when other than [EXT], records the user
value set in [USER].
[TIME]: Selects the local time. (hh, mm, ss)
[DATE]: Selects the local date and time. (YY, MM, DD, hh)
[TCG]: The value of time code generator is recorded as user bits.
[FRAME RATE]: Selects camera imaging information (such as frame rate).
[REGEN]: Reads the value recorded to the card and continuously records that value.
f Factory setting: [USER/EXT]
[REC META DATA] [LOAD] Loads the metadata upload le saved to the SD memory card.
[RECORD] Sets whether to add loaded metadata at a recording.
[ON]: Adds metadata.
[OFF]: Does not add metadata.
f Factory setting: [OFF]
[USER CLIP NAME] Sets data to be recorded to [USER CLIP NAME].
(When [RECORD] is [ON])
[TYPE1]: Records setting values of the loaded data.
[TYPE2]: Records the loaded data and counter value.
(When [RECORD] is [OFF])
[TYPE1]: Records the same value as [GLOBAL CLIP ID].
[TYPE2]: Records the same value as [CLIP NAME].
f Factory setting: [TYPE1]
[CARD SERIAL] Enables/disables the function for storing the text memo with the serial number or the type of card as
metadata.
[ON], [OFF]
f Factory setting: [OFF]
[INITIALIZE] Deletes all loaded metadata and initializes.
[PROPERTY] Checks and corrects loaded metadata.
[LANGUAGE] Sets the language used to display metadata. (Only when [NTSC(J)] is selected as the region of use)
[ENGLISH], [JAPANESE]
[CLIP]
This item is used to perform various tasks, such as playing back, deleting, copying clips, and editing metadata, while checking the thumbnails of the
clips displayed in the viewnder.
These menu items are enabled when the thumbnail screen is displayed.
Clip operations such as [DELETE] or [COPY] are enabled when the target thumbnail is selected.
Some items are displayed only in specic situations such as in USB host mode or on the explorer screen.
Item Description of settings
[REPOSITION] Selects a clip to be displayed on the thumbnail screen.
[ALL CLIP]: Displays all clips as thumbnails.
[SAME FORMAT CLIPS]: Displays only the clips recorded in the same format as the system format as
thumbnails. Clips recorded in the same format means that each item of [LINE&FREQ], [REC FORMAT],
and [AUDIO SMPL RES] in the main menu → [SYSTEM MODE] matches the current setting status.
Example) [1080-59.94i/P], [AVC-I100], [24BIT]
[SELECTED CLIPS]: Displays only the clips selected with the cursor buttons as thumbnails. The
thumbnails appear in the selected order.
[MARKED CLIPS]: Displays only the clips with shot marks added as thumbnails.
[TEXT MEMO CLIPS]: Displayed only clips with text memo data attached as thumbnails.
[SLOT CLIPS]: Displays only the clips of the selected slot as thumbnails.
[NG CLIPS]: Displays only the clips with the defective clip indicator in the thumbnail.
f Factory setting: [ALL CLIP]
[DELETE] Deletes selected clips.
[FORMAT] When the [FORMAT] menu is selected, format the P2 card of the specied slot.
[SLOT 1], [SLOT 2], [SD CARD]
f When a CPS password is set, you can select [NORMAL] (normal unencrypted format) or
[CPS(ENCRYPT)] (encrypted format).
f Data deleted as a result of formatting cannot be restored. Always check the data before formatting.